Tungsten Carbide Performance Parameter Table
Detailed technical parameters of cemented carbide materials to help you accurately select the most suitable Tungsten Carbide solution.
耐磨系列
High-hardness and wear-resistant Tungsten Carbide materials, suitable for various molds, cutting tools and wear-resistant parts, with excellent wear resistance and long service life.
| 品种分类 정렬 |
材質 등급 |
HIP | CIP | 颗粒 곡물 |
Co(%) | 比重 밀도 g/cm³ |
硬度 경도 HRA |
硬度 경도 HV |
抗弯强度 T.R.S N/mm² |
用途 애플리케이션 |
|---|---|---|---|---|---|---|---|---|---|---|
| 耐磨系列 | M10 | ● | 超细 슈퍼파인 |
6.0 | 14.80 | 94 | 1900 | 3800 | 常用粉末冶金模具，也可用于刀片、密封环 Often used for powder metallurgy dies, blade, chip, seal ring and gasket ring. |
|
| M20 | ● | ● | 中 Medium |
6.5 | 14.88 | 91 | 1550 | 3100 | 硬度高，很好耐磨性，通用抽拉模具 High hardness, wear-resistant, used widely in common drawing dies. |
|
| M30 | ● | ● | 中 Medium |
8.0 | 14.62 | 89.5 | 1400 | 3200 | 硬度高，很好耐磨性，通用抽拉模具 High hardness, wear-resistant, used widely in common drawing dies. |
|
| M33 | ● | ● | 超细 Fine |
8.0 | 14.60 | 92 | 1700 | 3800 | 用于较硬材料的拉深模 Used in drawing dies which is for high rigidity martl. |
耐磨耐冲击系列
높은 경도를 보장하면서도 인성이 뛰어나 충격 하중을 받는 정밀 금형 및 성형 도구에 적합합니다.
| 品种分类 정렬 |
材質 등급 |
HIP | CIP | 颗粒 곡물 |
Co(%) | 比重 밀도 g/cm³ |
硬度 경도 HRA |
硬度 경도 HV |
抗弯强度 T.R.S N/mm² |
用途 애플리케이션 |
|---|---|---|---|---|---|---|---|---|---|---|
| 耐磨耐冲击系列 | C10 | ● | 中 Medium |
10 | 14.30 | 89 | 1200 | 3430 | 韧性、硬度极佳，是常用冲头、衬套、入子、镶件较好材料，也是成形模具、卷圆模、轧形模，应力较大深拉模不错材料选择 Toughness, hardness are good, widely used in punches,bushings,inserts,coring circles,roll shape dies,chose this material for forming dies under big stress. |
|
| C15 | ● | 细 Fine |
13 | 14.06 | 91 | 1550 | 3600 | 适用于精密五金薄冲片、引线框、IC模，不适用于厚片冲压 Used for punching precise hardware,nonware sheets,guiding frame,IC dies.Can't be used for punching thick sheets. |
||
| C30 | ● | ● | 中 Medium |
15 | 14.20 | 87 | 1070 | 3500 | 韧性、硬度极佳，是常用冲头、衬套、入子、镶件较好材料，也是成形模具、卷圆模、轧形模，应力较大深拉模不错材料选择 Toughness, hardness are good, widely used in punches,bushings,inserts,coring circles,roll shape dies,chose this material for forming dies under big stress. |
|
| C35 | ● | 细 Fine |
15 | 13.85 | 89.5 | 1320 | 3700 | 通过各类薄片刻冲压、引线框、LED支架、IC模、电机定转子等常用 Used commonly for sheet punching,guiding frame,LED frame,IC. |
||
| C38 | ● | 中细 중간 벌금 |
12 | 14.20 | 89 | 1400 | 3300 | 专用矽钢片、EI片冲压 Used for punching silicon steel sheet,EI sheet. |
||
| C78 | ● | 细 Fine |
12 | 14.10 | 90 | 1450 | 3950 | 专用线切割、电火花加工场合 Can be used specially when wire EDM. |
||
| C40 | ● | ● | 粗 Tough |
20 | 13.60 | 84 | 850 | 2850 | 常用冷冲、冷镦、冷挤压模具 Used in cold, common cold punching dies, cold heading dies, cold extruding dies. |
|
| C50 | ● | ● | 粗 Tough |
22 | 13.40 | 83 | 780 | 2950 | 应用于应力较大的场合，如螺丝、螺母、锻造等 Used when stress is big,such as screw,screw nut forging dies. |
超微粒系列
정밀 절삭 공구 및 고속 절삭 공구에 널리 사용되는 뛰어난 적색 경도와 내마모성을 갖춘 고속 절삭 및 가공용으로 특별히 설계되었습니다.
| 品种分类 정렬 |
材質 등급 |
HIP | CIP | 颗粒 곡물 |
Co(%) | 比重 밀도 g/cm³ |
硬度 경도 HRA |
硬度 경도 HV |
抗弯强度 T.R.S N/mm² |
用途 애플리케이션 |
|---|---|---|---|---|---|---|---|---|---|---|
| 超微粒系列 | QX05 | ● | 微 슈퍼파인 |
7.0 | 14.60 | 94 | 1950 | 3520 | 极高硬度，只适合冲击力较小耐磨件，刀具 Superhigh hardness, only used for small impacts and knife. |
|
| QX10 | ● | 微 슈퍼파인 |
8.0 | 14.60 | 92.8 | 1730 | 3800 | 极高硬度，只适合冲击力较小耐磨件，刀具 Superhigh hardness, only used for small impacts and knife. |
||
| QX20 | ● | 微 슈퍼파인 |
10 | 14.45 | 91.8 | 1550 | 4200 | 极高硬度，只适合冲击力较小耐磨件，刀具 Superhigh hardness, only used for small impacts and knife. |
||
| QX30 | ● | 微 슈퍼파인 |
12 | 14.15 | 92.3 | 1640 | 4000 | 极高硬度，只适合冲击力较小耐磨件，刀具 Superhigh hardness, only used for small impacts and knife. |
高温系列
고온 환경에서도 우수한 기계적 특성을 유지하여 항공우주, 항공 및 석유화학 산업과 같은 고온 응용 분야에 적합합니다.
| 品种分类 정렬 |
材質 등급 |
HIP | CIP | 颗粒 곡물 |
Co(%) | 比重 밀도 g/cm³ |
硬度 경도 HRA |
硬度 경도 HV |
抗弯强度 T.R.S N/mm² |
用途 애플리케이션 |
|---|---|---|---|---|---|---|---|---|---|---|
| 高温系列 | R20 | ● | 中 Medium |
专利 | 13.00 | 83 | 780 | 2550 | 热锻模 Used in hot forging dies. |
|
| R50 | ● | 中 Medium |
专利 | 13.20 | 84 | 850 | 2550 | 热挤中小型型材，热锻模 Medium and small sections extruded,hot forging dies. |
非磁性系列
Customized Tungsten Carbide alloys for special application requirements, with unique performance combinations to meet the strict requirements under special working conditions.
| 品种分类 정렬 |
材質 등급 |
HIP | CIP | 颗粒 곡물 |
Co(%) | 比重 밀도 g/cm³ |
硬度 경도 HRA |
硬度 경도 HV |
抗弯强度 T.R.S N/mm² |
用途 애플리케이션 |
|---|---|---|---|---|---|---|---|---|---|---|
| 非磁性系列 | W10 | ● | ● | 中 Medium |
Ni | 14.30 | 89.5 | 1320 | 1500 | 应用于应力较小的无磁性耐磨件 Used in non magnetic wear resistant parts whose's stress is small. |
| W10X | ● | ● | 细 Fine |
Ni | 14.30 | 92 | 1760 | 2700 | 应用于应力较小的无磁性耐磨件 Used in non magnetic wear resistant parts whose's stress is small. |
|
| W30 | ● | ● | 中 Medium |
Ni | 14.00 | 87 | 1160 | 3000 | 常用磁性成型模 Used in common magnetic forming dies. |
|
| W35 | ● | ● | 细 Fine |
Ni | 13.80 | 86.5 | 1070 | 2900 | 常用磁性成型模 Used in common magnetic forming dies. |
|
| W40 | ● | ● | 中 Medium |
Ni | 13.50 | 85.5 | 930 | 3000 | 常用磁性成型模 Used in common magnetic forming dies. |
Need Tungsten Carbide Material Selection Advice?
Our technical team can recommend the most suitable Tungsten Carbide material solution for you according to your specific application requirements, and provide detailed technical support and customization services.
English 
German 
Korean 
